(1) You can buy a workbench or your can make it from scratch.

(2) These have a fairly small, short table and are designed to be set up on a workbench or other type of stand.

(3) If your tools have become scattered over the summer, or if they're in a pile on your workbench , now's the time to corral them.

(4) Sam walked over to a stool in front of a bare workbench and sat down, putting his coffee cup on the workbench .

(5) Wiping up sawdust, on the shop workbench , from drilling or sandpapering is easy.

(6) Have the board hung above the workbench with each tool's resting place clearly marked.

(7) It can be placed in a corner of the garage, under a workbench , on a porch or in its own little shed.

(8) Tack the lower two boards directly to your workbench to help hold the jig square.

(9) First, you need a good workbench or kitchen counter with a straight outside edge.

(10) Likewise, plans for our master workbench and router table detail all you need to know to construct these time saving aids.

(11) The vise is a workbench tool and should be firmly secured before being used.

(12) Clamp the molding in a wood vise, or to a workbench , or on a sawhorse.

(13) Off he trotted back to the workbench and I hit my desk.

(14) He lays it down on the workbench and stands there, staring out the window.

(15) I bought a plain old mechanic's bench vise and bolted it to my garage workbench .

(16) They were spread casually about a large classroom with groups of white desks at the front and workbenches at the back.

(17) They offer a wide variety of storage options you may not even have considered, including workbenches , special cabinets, recycling bins-even bicycle hangers-to store all of your stuff and still fit your cars in the garage!

(18) The main floor was littered with machinery and workbenches , the bulk and arches of cast-iron lathes, presses, moulds and mini furnaces.

(19) A large pile of construction materials, scraps, workbenches , tables and garbage accumulate around the displays as they are being built.

(20) I have all my tables and workbenches on rollers, so that I can move things around easily.